$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NV029H-(Qty 5) Valance Clip
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NV012B1- Plastic Link
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x #1.8 mm cord size (click here for more information)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV002 Vertical Track End Control
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV001-100 Clips(no returns)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x # Threading Tool
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV014A- White Vertical Repair Clip
1 x Go To Roman And Woven Wood Parts
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM031C-1" Wand Tilter A
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part 33A Vertical Track Bracket
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x ANP10A - White Right Side Body Cover
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NP39A stopper
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038D - 1" Wand Tilter
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NP72D-Off White Right Side End Cap
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NP76 Grey Motor (no returns)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP36B White Plastic Plug
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP72J White Left Cord Clutch Cover
$587.83
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts