$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NM013C- 2" Wand Tilter
1 x Part NM013D Wand Tilter
1 x Part NV023- Vertical End Cap
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV014A- White Vertical Repair Clip
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part 07- Installation Bracket (screws not included)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NP37A- Motor Lock
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NP39A stopper
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM038D - 1" Wand Tilter
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV002B Vertical Track End Control Notchless
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP36A Clear Plastic Plug
1 x Part NV030- Valance Corner
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x YNP01G-(1)Cord Guide
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP07A Wear Bar
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NV021- Lock Washer
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP36C Off White Plastic Plug
1 x Part NV027-#10 Vertical Chain Connector
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP16B Tape Only (160 feet)
1 x Part NV002C End Control With Chain
1 x Part NV009A- Vertical End Control
1 x Part NP76 Grey Motor (no returns)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV021a- Vertical Stopper
1 x Part NP05A Cord Wedge
1 x Part NP62 cord guide
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV030A- Valance Corner
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM012A Cord Tilter High Profile
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP72G-White Left Side End Cap
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
$997.53
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts