$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV029G-(Qty 4) Valance Clip
1 x YNP01EF-Metal Cord Guide
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP39A stopper
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM024- Mini Blind Cord Lock
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NM038D - 1" Wand Tilter
1 x Part SVS6 White End Cap(1 pair)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM008 - Wand Tilter
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV021- Lock Washer
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV002 Vertical Track End Control
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP62 cord guide
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP37A- Motor Lock
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM038E - 1" Wand Tilter
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x YNP01E-Del Mar Vanilla Left Side
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP75 White Motor (no returns)
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP16B Tape Only (160 feet)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV029A (Qty 3) Valance clip
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP36A Clear Plastic Plug
1 x Part NV002D - Wand Control
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
$1,277.77
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts