$14.99

Part NP66L Black Motor Left Side (no returns or refunds)

Part NP66L Black Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
2 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV030- Valance Corner
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NP36C Off White Plastic Plug
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV012B1- Plastic Link
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV001-100 Clips(no returns)
1 x Part NV002C End Control With Chain
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV021B - Decomatic Black Lock Washer
2 x Part NV001A Fabric Weight
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP02- C Clamp For Cord Loop System
$425.66
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts