$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM012A Cord Tilter High Profile
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM038E - 1" Wand Tilter
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NV002 Vertical Track End Control
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP36C Off White Plastic Plug
2 x Part NP36B White Plastic Plug
1 x Part NP66 Right Side Black Motor (no returns or refunds)
2 x YNP01B Left Side Cord lock (White only)
2 x Part NP72I White Right Cord Clutch Cover
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x YNP01C Left Side Cord lock (White only)
1 x YNP01G-(1)Cord Guide
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x ANP11B - White Left Side Lock Body
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x ANP10A - White Right Side Body Cover
1 x Part NP37A- Motor Lock
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP76 Grey Motor (no returns)
$683.61
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts