$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x Part 34 Installation Bracket
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x #2.7 mm cord size (click here for more information)
1 x Part SVS92 White End Cap(1 pair)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part SVS6 White End Cap(1 pair)
1 x Part 07- Installation Bracket (screws not included)
1 x Go To Roman And Woven Wood Parts
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #1.8 mm cord size (click here for more information)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #1.4 mm cord size (click here for more information)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x Part 33A Vertical Track Bracket
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part 32A Vertical Track Bracket
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NV023- Vertical End Cap
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV002 Vertical Track End Control
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP39A stopper
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NV009A- Vertical End Control
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NV021a- Vertical Stopper
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NM038C - 1' Wand Tilter
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV021- Lock Washer
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP62 cord guide
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NV003- Small Vertical Track End Control
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x YNP01EF-Metal Cord Guide
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP72H-White Right Side End Cap
1 x Part NP16A- Plug For Easy Rise Tape
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
$949.35
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts