$9.99

Part NP39- Tan Motor For Cordless Blind(no returns)
[blinds parts]

Part NP39-  Tan Motor For Cordless Blind(no returns)
You should replace the trans and all motors. I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repair one shade. No returns or refunds on all cordless shade parts. It's best to replace all the motors and the trans. To replace motor or trans, pull shade down. Lock up motor, so not to release the tension. Remove trans with motor. Replace damaged parts and reinstall. Remove any locking pins or motor locks.
Reviews
 
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV001-100 Clips(no returns)
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
2 x Part NM043A-Loop Type Wand Tilter
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM038E - 1" Wand Tilter
1 x YNP01G-(1)Cord Guide
1 x ANP10A - White Right Side Body Cover
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NM038C - 1' Wand Tilter
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x YNP01EF-Metal Cord Guide
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM038D - 1" Wand Tilter
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV021a- Vertical Stopper
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM013C- 2" Wand Tilter
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
$594.11
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts