$14.99

Part NP66L Black Motor Left Side (no returns or refunds)

Part NP66L Black Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV002 Vertical Track End Control
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP72J White Left Cord Clutch Cover
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Go To Roman And Woven Wood Parts
1 x Part SVS92 White End Cap(1 pair)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x #1.2 mm cord size (click here for more information)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP23 (Qty 1) Clutch Cover
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x Part NM038E - 1" Wand Tilter
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM013D Wand Tilter
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x # Threading Tool
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM038C - 1' Wand Tilter
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NP07A Wear Bar
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
$706.16
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts