$14.99

Part NP76 Grey Motor (no returns)
[blind parts]

Part NP76 Grey Motor (no returns)
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. I only have these basic instructions. Remove motor and stack the shade up turning the rod in the opposite direction of the loading arrow. This arrow is found on the motor. To install new motor, make one full turn in the direction of the turn rod loading motor, I use an allan wrench. Place a pin in the top hole to lock it in place, I use a paper clip. Install motor, remove pin and lower the shade.
Reviews
Currently viewing: Part NP76 Grey Motor (no returns)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
2 x Part NM012- 2" Wand Tilter For Low Profile
2 x Part NM036- Right Side 1 Inch Tilter
2 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
2 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
2 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
2 x Part NM040J- Valance Clip (Quantity 15)
2 x Part NP76 Grey Motor (no returns)
2 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NP65L Blue Motor Left Side (no returns or refunds)
2 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
2 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
2 x Part NM013C- 2" Wand Tilter
2 x Part NM006B- Wand Tilter For Levolor Blind
2 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
2 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
2 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
2 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM013D Wand Tilter
2 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
2 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
2 x Part NM005D Cord Tilter For 2" Blind
2 x YNP01EF-Metal Cord Guide
2 x Part NM006-Not Available(A Compatible Tilter) will ship out
2 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
2 x Part NM031C-1" Wand Tilter A
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
2 x Part NM017 Cord Tilter Fits Square Rod
2 x Part NM012C- Discontinued New Version Will Ship Out
2 x YNP01B Left Side Cord lock (White only)
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
2 x Part NM039-Barrel and Cradle For 1" Blind
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
2 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
2 x Part NM011A-Hook And Sleeve (Quantity 5)
2 x Part NM041G Valance Clip 2" Tall (Quantity 15)
2 x Part NM031D- 1" Wand Tiler With Clutch
2 x Part NP72J White Left Cord Clutch Cover
2 x Part NP72B-Right Side Blue Cord Clutch
2 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NP16B Tape Only (160 feet)
2 x Part NP39A stopper
2 x Part NP66 Right Side Black Motor (no returns or refunds)
2 x Part NP63L Green Motor Left Side (no returns or refunds)
2 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
2 x Part NM003AA- Cord Lock for 2" Blind
2 x ANP10A - White Right Side Body Cover
2 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
2 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x YNP01D-Right Del Mar Green Lock
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP72F-Vanilla Left Side End Cap
1 x YNP01G-(1)Cord Guide
2 x Part NM024- Mini Blind Cord Lock
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x ANP11B - White Left Side Lock Body
1 x Part NM004A-Hunter Douglas Cord Tilter
2 x Part NM014A- Wand Tilter For 2" High Profile
2 x YNP01E-Del Mar Vanilla Left Side
2 x Part NP03E-Clear Plastic Stopball (Qty 10)
2 x Part NP66L Black Motor Left Side (no returns or refunds)
2 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
2 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
2 x Part NP36C Off White Plastic Plug
2 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part NM012A Cord Tilter High Profile
2 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
2 x ANP11A - Vanilla Left Side Lock Body
2 x Part NP07A Wear Bar
2 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
2 x Part NP10A- Cord Guide 1 3/4" Wide
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
2 x Part NP65 Right Side Blue Motor (no returns or refunds)
2 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
2 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NM003BB1-Hunter Douglas Compatible Ships Out
2 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
2 x Part NM003 -Wand Tilter For 2 Inch Blind
2 x Part NM011C-(Qty. 20)Clear Plastic End Cap
2 x Part SVS92 White End Cap(1 pair)
2 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
2 x Part NP39- Tan Motor For Cordless Blind(no returns)
2 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
2 x Part NP03D Plastic Washer 1/4" Outside Diameter
2 x Part NP72I White Right Cord Clutch Cover
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP75 White Motor (no returns)
1 x Part NP05A Cord Wedge
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP72H-White Right Side End Cap
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP37A- Motor Lock
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM013D- Compatible Tilter Ships Out
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
$2,569.54
Notifications
NotificationsNotify me of updates to Part NP76 Grey Motor (no returns)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts