$14.99

Part NP65 Right Side Blue Motor (no returns or refunds)
[blinds parts]

Part NP65 Right Side Blue Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NV021a- Vertical Stopper
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NP02- C Clamp For Cord Loop System
2 x Part NP36A Clear Plastic Plug
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM040H- Valance Clip (Quantity 15)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
2 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NV002D - Wand Control
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part 26 Large Installation Bracket (screws not included)
2 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM008 - Wand Tilter
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x YNP01B Left Side Cord lock (White only)
1 x Part 34 Installation Bracket
1 x Part SVS6 White End Cap(1 pair)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP36C Off White Plastic Plug
2 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x ANP11A - Vanilla Left Side Lock Body
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x YNP01G-(1)Cord Guide
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP05A Cord Wedge
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part 36 Pleated Shade Bracket (1)
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part SVS92 White End Cap(1 pair)
1 x ANP11B - White Left Side Lock Body
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
$803.49
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts