$9.99

Part NP39- Tan Motor For Cordless Blind(no returns)
[blinds parts]

Part NP39- Tan Motor For Cordless Blind(no returns)
You should replace the trans and all motors. I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repair one shade. No returns or refunds on all cordless shade parts. It's best to replace all the motors and the trans. To replace motor or trans, pull shade down. Lock up motor, so not to release the tension. Remove trans with motor. Replace damaged parts and reinstall. Remove any locking pins or motor locks.
Reviews
Currently viewing: Part NP39- Tan Motor For Cordless Blind(no returns)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x Part NV030A- Valance Corner
1 x Part NP76 Grey Motor (no returns)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NV009A- Vertical End Control
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NV002D - Wand Control
1 x Part NM038D - 1" Wand Tilter
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013D Wand Tilter
1 x Part NV002C End Control With Chain
1 x ANP11B - White Left Side Lock Body
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP05A Cord Wedge
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV021- Lock Washer
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV005- Carrier Uses Plastic Link
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP37A- Motor Lock
1 x Part NP36A Clear Plastic Plug
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP75 White Motor (no returns)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP63L Green Motor Left Side (no returns or refunds)
$571.71
Notifications
NotificationsNotify me of updates to Part NP39- Tan Motor For Cordless Blind(no returns)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts