$14.99

Part NP65 Right Side Blue Motor (no returns or refunds)
[blinds parts]

Part NP65 Right Side Blue Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP36B White Plastic Plug
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x ANP11B - White Left Side Lock Body
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NP16B Tape Only (160 feet)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x YNP01G-(1)Cord Guide
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM038D - 1" Wand Tilter
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM013C- 2" Wand Tilter
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM040G- Valance Clip (Quantity 15)
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP72H-White Right Side End Cap
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP36C Off White Plastic Plug
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP36A Clear Plastic Plug
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM008 - Wand Tilter
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP75 White Motor (no returns)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP72F-Vanilla Left Side End Cap
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP72G-White Left Side End Cap
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP07A Wear Bar
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP62 cord guide
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP39A stopper
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP05A Cord Wedge
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x YNP01EF-Metal Cord Guide
1 x ANP10A - White Right Side Body Cover
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP37A- Motor Lock
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012A Cord Tilter High Profile
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM003AA- Cord Lock for 2" Blind
$1,712.40
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts