$14.99

Part NP66 Right Side Black Motor (no returns or refunds)
[blinds parts]

Part NP66 Right Side Black Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP75 White Motor (no returns)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x YNP01G-(1)Cord Guide
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP62 cord guide
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP36A Clear Plastic Plug
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP05A Cord Wedge
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP39A stopper
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP37A- Motor Lock
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x YNP01A Right Side Cord lock (White Only)
$608.44
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts