$14.99

Part NP66 Right Side Black Motor (no returns or refunds)
[blinds parts]

Part NP66 Right Side Black Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NV029D (Qty 3) Valance Clip
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x YNP01G-(1)Cord Guide
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM012A Cord Tilter High Profile
1 x Part NV005- Carrier Uses Plastic Link
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NV021- Lock Washer
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM037 Cord Tilter For 1" Blind
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM038D - 1" Wand Tilter
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP37A- Motor Lock
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NV002 Vertical Track End Control
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV002D - Wand Control
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NP39A stopper
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV030A- Valance Corner
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NV002C End Control With Chain
$597.71
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts