$14.99

Part NP76 Grey Motor (no returns)
[blind parts]

Part NP76 Grey Motor (no returns)
I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repairing one shade. No returns or refunds on all cordless shade parts. I only have these basic instructions. Remove motor and stack the shade up turning the rod in the opposite direction of the loading arrow. This arrow is found on the motor. To install new motor, make one full turn in the direction of the turn rod loading motor, I use an allan wrench. Place a pin in the top hole to lock it in place, I use a paper clip. Install motor, remove pin and lower the shade.
Reviews
Currently viewing: Part NP76 Grey Motor (no returns)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x Part 07- Installation Bracket (screws not included)
1 x Part NV002C End Control With Chain
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NV001A Fabric Weight
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NV002 Vertical Track End Control
2 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
2 x Part 36 Pleated Shade Bracket (1)
2 x Part NP71 Off White Left Cord Clutch Cover
2 x Part NR08 Plastic Sew On Ring 5/8"
2 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM015- White Wand Tilter For One Inch blind
3 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
2 x Part NP62 cord guide
2 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
3 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
2 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part SVS6 White End Cap(1 pair)
1 x Part NV005- Carrier Uses Plastic Link
3 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM039-Barrel and Cradle For 1" Blind
2 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
2 x Part NP72F-Vanilla Left Side End Cap
2 x Part NM012C- Discontinued New Version Will Ship Out
2 x Part NM041G Valance Clip 2" Tall (Quantity 15)
3 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM040J- Valance Clip (Quantity 15)
2 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x YNP01E-Del Mar Vanilla Left Side
2 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part NP16A- Plug For Easy Rise Tape
2 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
3 x Part NP36C Off White Plastic Plug
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
2 x Part NV009- Vertical Track Laserlite Barrel For End Control
2 x Part NM036- Right Side 1 Inch Tilter
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
2 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
2 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV003- Small Vertical Track End Control
1 x Part NP37A- Motor Lock
3 x Part NM004C-Cord Tilter Fits Hex Rod
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM013C- 2" Wand Tilter
2 x Part 08- Silhouette Installation Bracket (screws not included)
2 x Part NV029A (Qty 3) Valance clip
2 x Part NM013D Wand Tilter
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
2 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
2 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
2 x Part NP67A- Right Side White Motor (no returns or refunds)
2 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
2 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
3 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x YNP01EF-Metal Cord Guide
1 x Part NV001-100 Clips(no returns)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part- NM087 Mini Blind Bottom Rail Plug
2 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NV027-#10 Vertical Chain Connector
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NV012B1- Plastic Link
3 x Part NM011- Wand Tilter For 1" Blind
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NP07A Wear Bar
3 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x White Cord Loop B(6 Feet Tall) Click Here For More Information
2 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
2 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP39A stopper
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP36B White Plastic Plug
2 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012A Cord Tilter High Profile
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV030- Valance Corner
2 x Part NM005-Cord Tilter Fits Hex Rod
2 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 30A Brown Bracket LP (screws not included)
2 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NV031B-Metal Link For 3dayblind Carrier
2 x Part NP75 White Motor (no returns)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM038D - 1" Wand Tilter
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
2 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NP36A Clear Plastic Plug
1 x Part NV029D (Qty 3) Valance Clip
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM005B Cord Tilter Fits Hex Rod
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
2 x Go To Roman And Woven Wood Parts
2 x Part NM031C-1" Wand Tilter A
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NV014- Silver Vertical Repair Clip
1 x YNP01D-Right Del Mar Green Lock
$2,042.34
Notifications
NotificationsNotify me of updates to Part NP76 Grey Motor (no returns)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts