$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP36B White Plastic Plug
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NP07A Wear Bar
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP72H-White Right Side End Cap
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NP75 White Motor (no returns)
1 x Part NP62 cord guide
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV002D - Wand Control
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NV029A (Qty 3) Valance clip
1 x Part NP16B Tape Only (160 feet)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV021- Lock Washer
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV002 Vertical Track End Control
1 x Part NP76 Grey Motor (no returns)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV014A- White Vertical Repair Clip
1 x Part NV009A- Vertical End Control
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV002C End Control With Chain
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV001A Fabric Weight
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP36C Off White Plastic Plug
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP72G-White Left Side End Cap
1 x ANP11B - White Left Side Lock Body
1 x YNP01B Left Side Cord lock (White only)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV003- Small Vertical Track End Control
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x YNP01A Right Side Cord lock (White Only)
$922.98
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts