$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP39A stopper
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NP36A Clear Plastic Plug
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM038C - 1' Wand Tilter
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP05A Cord Wedge
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP72H-White Right Side End Cap
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP16B Tape Only (160 feet)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP75 White Motor (no returns)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM035- 1 Inch Wand Tilter Left Side
$972.18
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts