$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NP16B Tape Only (160 feet)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x YNP01EF-Metal Cord Guide
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM038D - 1" Wand Tilter
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM031C-1" Wand Tilter A
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NP75 White Motor (no returns)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x ANP10A - White Right Side Body Cover
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM013C- 2" Wand Tilter
1 x Part NP36C Off White Plastic Plug
$882.20
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts