$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM012A Cord Tilter High Profile
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP36A Clear Plastic Plug
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM024- Mini Blind Cord Lock
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP16B Tape Only (160 feet)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x YNP01G-(1)Cord Guide
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP76 Grey Motor (no returns)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP72H-White Right Side End Cap
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM031C-1" Wand Tilter A
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM013D Wand Tilter
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP37A- Motor Lock
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP36C Off White Plastic Plug
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM038C - 1' Wand Tilter
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP07A Wear Bar
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
$1,212.28
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts