$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Part NP63L Green Motor Left Side (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP23 (Qty 1) Clutch Cover
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP02- C Clamp For Cord Loop System
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part 07- Installation Bracket (screws not included)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part 32A Vertical Track Bracket
1 x Part NP75 White Motor (no returns)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
$213.21
Notifications
NotificationsNotify me of updates to Part NP63L Green Motor Left Side (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts