$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV030- Valance Corner
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV021a- Vertical Stopper
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV009A- Vertical End Control
1 x Part NV002 Vertical Track End Control
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV003- Small Vertical Track End Control
1 x Part NV030A- Valance Corner
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV014A- White Vertical Repair Clip
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM043-Black Wand Tilter 2" With Hook
2 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
2 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
2 x Part- NM087 Mini Blind Bottom Rail Plug
3 x Part NM012C- Discontinued New Version Will Ship Out
2 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP76 Grey Motor (no returns)
2 x Part NM003 -Wand Tilter For 2 Inch Blind
2 x Part NM011- Wand Tilter For 1" Blind
1 x Part NP72H-White Right Side End Cap
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP05A Cord Wedge
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x ANP11A - Vanilla Left Side Lock Body
1 x ANP11B - White Left Side Lock Body
2 x Part NM013C- 2" Wand Tilter
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP36C Off White Plastic Plug
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
3 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP71 Off White Left Cord Clutch Cover
2 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP36B White Plastic Plug
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM031C-1" Wand Tilter A
$1,152.14
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts