$14.99

Part NP65L Blue Motor Left Side (no returns or refunds)

Part NP65L Blue Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV002C End Control With Chain
1 x Part NV002 Vertical Track End Control
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV014A- White Vertical Repair Clip
1 x Part NV021- Lock Washer
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72J White Left Cord Clutch Cover
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x YNP01EF-Metal Cord Guide
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP71 Off White Left Cord Clutch Cover
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP16B Tape Only (160 feet)
1 x ANP11A - Vanilla Left Side Lock Body
1 x YNP01E-Del Mar Vanilla Left Side
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP75 White Motor (no returns)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x YNP01G-(1)Cord Guide
1 x ANP11B - White Left Side Lock Body
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP72H-White Right Side End Cap
1 x Part NP05A Cord Wedge
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP72B-Right Side Blue Cord Clutch
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM038D - 1" Wand Tilter
1 x Part NP36C Off White Plastic Plug
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM038C - 1' Wand Tilter
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x ANP10A - White Right Side Body Cover
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP36B White Plastic Plug
1 x Part NP72G-White Left Side End Cap
1 x Part NP37A- Motor Lock
1 x Part NM038E - 1" Wand Tilter
1 x Part NP07A Wear Bar
1 x Part NP39A stopper
1 x Part NP36A Clear Plastic Plug
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
$1,144.10
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts