$14.99

Part NP65L Blue Motor Left Side (no returns or refunds)

Part NP65L Blue Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM013D Wand Tilter
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part 33A Vertical Track Bracket
1 x Part NM038D - 1" Wand Tilter
1 x Part NM012A Cord Tilter High Profile
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM013D- Compatible Tilter Ships Out
1 x ANP10A - White Right Side Body Cover
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP07A Wear Bar
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NR09 Cord Guide (screws not included)
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP72B-Right Side Blue Cord Clutch
1 x ANP11A - Vanilla Left Side Lock Body
$540.38
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts