$14.99

Part NP65L Blue Motor Left Side (no returns or refunds)

Part NP65L Blue Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Part NP65L Blue Motor Left Side (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72G-White Left Side End Cap
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP05A Cord Wedge
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP16B Tape Only (160 feet)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP07A Wear Bar
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP36A Clear Plastic Plug
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x ANP10A - White Right Side Body Cover
1 x Part NM031C-1" Wand Tilter A
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP37A- Motor Lock
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM012A Cord Tilter High Profile
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM038E - 1" Wand Tilter
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP36B White Plastic Plug
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP72H-White Right Side End Cap
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NP62 cord guide
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM038D - 1" Wand Tilter
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x YNP01G-(1)Cord Guide
1 x Part NP36C Off White Plastic Plug
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP39A stopper
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP75 White Motor (no returns)
1 x ANP11B - White Left Side Lock Body
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x YNP01EF-Metal Cord Guide
1 x Part NM013D Wand Tilter
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM013C- 2" Wand Tilter
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
$1,884.50
Notifications
NotificationsNotify me of updates to Part NP65L Blue Motor Left Side (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts