$14.99

Part NP66L Black Motor Left Side (no returns or refunds)

Part NP66L Black Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP72D-Off White Right Side End Cap
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP07A Wear Bar
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP37A- Motor Lock
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM012A Cord Tilter High Profile
1 x Part NM038C - 1' Wand Tilter
1 x Part NM038E - 1" Wand Tilter
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM038D - 1" Wand Tilter
1 x ANP11B - White Left Side Lock Body
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM013D Wand Tilter
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x ANP10A - White Right Side Body Cover
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP39A stopper
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP16B Tape Only (160 feet)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM013C- 2" Wand Tilter
1 x YNP01C Left Side Cord lock (White only)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM013D- Compatible Tilter Ships Out
$753.36
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts