$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
Currently viewing: Part NP67A- Right Side White Motor (no returns or refunds)
 
Categories
1" & 2" Mini & Wood Blind Parts
Pleated Cellular Shade Parts
Vertical Blind Parts
Blind Cords
Window Blind Safety Information
Roman Shade and Woven Wood Parts
Blind Installation Brackets
Silhouette-Vienna-Shangri La
Information
Shipping & Returns
Repair Videos
Contact Us
Repair Charges
Cutdown Charges
Shopping Cart
1 x Part NM013D Wand Tilter
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP36A Clear Plastic Plug
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x YNP01A Right Side Cord lock (White Only)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x ANP11B - White Left Side Lock Body
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP36B White Plastic Plug
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP16B Tape Only (160 feet)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NP07A Wear Bar
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM008 - Wand Tilter
1 x ANP10A - White Right Side Body Cover
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP39A stopper
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NP36C Off White Plastic Plug
1 x Part NP72G-White Left Side End Cap
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP05A Cord Wedge
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM012A Cord Tilter High Profile
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM038C - 1' Wand Tilter
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP76 Grey Motor (no returns)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
$1,435.65
Notifications
NotificationsNotify me of updates to Part NP67A- Right Side White Motor (no returns or refunds)
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts