$14.99

Part NP65 Right Side Blue Motor (no returns or refunds)
[blinds parts]

Part NP65 Right Side Blue Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP16B Tape Only (160 feet)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NV002 Vertical Track End Control
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP36B White Plastic Plug
1 x Part NM038C - 1' Wand Tilter
1 x ANP10A - White Right Side Body Cover
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV012B1- Plastic Link
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV002D - Wand Control
1 x Part NV030A- Valance Corner
1 x Part NV030- Valance Corner
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP36A Clear Plastic Plug
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP07A Wear Bar
1 x Part NP39A stopper
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part SVS6 White End Cap(1 pair)
1 x YNP01B Left Side Cord lock (White only)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x ANP11B - White Left Side Lock Body
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x YNP01A Right Side Cord lock (White Only)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM038D - 1" Wand Tilter
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV029G-(Qty 4) Valance Clip
$896.69
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts