$14.99

Part NP65 Right Side Blue Motor (no returns or refunds)
[blinds parts]

Part NP65 Right Side Blue Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part 33A Vertical Track Bracket
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM004A-Hunter Douglas Cord Tilter
2 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM008 - Wand Tilter
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM003B 2" Wand Tilter Zinc Loop
2 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM013C- 2" Wand Tilter
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM038C - 1' Wand Tilter
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP23 (Qty 1) Clutch Cover
1 x YNP01EF-Metal Cord Guide
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP39A stopper
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
2 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP37A- Motor Lock
1 x Part NP62 cord guide
$525.67
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts