$9.99

Part NP39- Tan Motor For Cordless Blind(no returns)
[blinds parts]

Part NP39-  Tan Motor For Cordless Blind(no returns)
You should replace the trans and all motors. I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repair one shade. No returns or refunds on all cordless shade parts. It's best to replace all the motors and the trans. To replace motor or trans, pull shade down. Lock up motor, so not to release the tension. Remove trans with motor. Replace damaged parts and reinstall. Remove any locking pins or motor locks.
Reviews
 
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part SVS92 White End Cap(1 pair)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP36B White Plastic Plug
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM031C-1" Wand Tilter A
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP37A- Motor Lock
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP39A stopper
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP16A- Plug For Easy Rise Tape
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP07A Wear Bar
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP16B Tape Only (160 feet)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP76 Grey Motor (no returns)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM038D - 1" Wand Tilter
$780.41
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts