$14.99

Part NP66 Right Side Black Motor (no returns or refunds)
[blinds parts]

Part NP66 Right Side Black Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
2 x Part NP07A Wear Bar
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
2 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV029G-(Qty 4) Valance Clip
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NV023- Vertical End Cap
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP72F-Vanilla Left Side End Cap
1 x YNP01G-(1)Cord Guide
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP36B White Plastic Plug
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP05A Cord Wedge
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NV029A (Qty 3) Valance clip
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV002 Vertical Track End Control
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x YNP01EF-Metal Cord Guide
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NV014A- White Vertical Repair Clip
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NV009A- Vertical End Control
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NV002D - Wand Control
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV012B1- Plastic Link
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV027-#10 Vertical Chain Connector
$631.74
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts