$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part 34 Installation Bracket
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV012B1- Plastic Link
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM008 - Wand Tilter
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NV001A Fabric Weight
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV029J Valance Clips 3 per Order
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM024- Mini Blind Cord Lock
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NM013D Wand Tilter
1 x Part NM031C-1" Wand Tilter A
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV001-100 Clips(no returns)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NV030- Valance Corner
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
$527.85
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts