$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part 33A Vertical Track Bracket
1 x Part 32A Vertical Track Bracket
1 x Part SVS6 White End Cap(1 pair)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP02- C Clamp For Cord Loop System
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP72H-White Right Side End Cap
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM038E - 1" Wand Tilter
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP62 cord guide
1 x Part NM024- Mini Blind Cord Lock
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP36B White Plastic Plug
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM012A Cord Tilter High Profile
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP07A Wear Bar
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP37A- Motor Lock
1 x Part NP72B-Right Side Blue Cord Clutch
$693.38
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts