$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NV015- Top Plug For Vertical Fabric
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP62 cord guide
1 x Part NM037 Cord Tilter For 1" Blind
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP36A Clear Plastic Plug
1 x Part NV029J Valance Clips 3 per Order
1 x Part NP16B Tape Only (160 feet)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NV021a- Vertical Stopper
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM013C- 2" Wand Tilter
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV009A- Vertical End Control
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NV029A (Qty 3) Valance clip
1 x Part NP39A stopper
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP36B White Plastic Plug
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM012C- Discontinued New Version Will Ship Out
$664.87
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts