$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part 32A Vertical Track Bracket
1 x Part NV029A (Qty 3) Valance clip
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NV021a- Vertical Stopper
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV030- Valance Corner
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV021- Lock Washer
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM040H- Valance Clip (Quantity 15)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NV002 Vertical Track End Control
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
$317.64
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts