$14.99

Part NP66L Black Motor Left Side (no returns or refunds)

Part NP66L Black Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NP72I White Right Cord Clutch Cover
2 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NM038E - 1" Wand Tilter
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP44- Shaft And Connector For Ultraglide Shade
2 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP72J White Left Cord Clutch Cover
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP72G-White Left Side End Cap
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP16B Tape Only (160 feet)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP39A stopper
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP07A Wear Bar
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP37A- Motor Lock
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP36A Clear Plastic Plug
1 x Part NP08a -New style guide(you must drill out grommet to fit)
$745.53
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts