$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP37A- Motor Lock
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP62 cord guide
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM006B- Wand Tilter For Levolor Blind
$306.48
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts