$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NP75 White Motor (no returns)
1 x Part NP36B White Plastic Plug
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP72G-White Left Side End Cap
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM012A Cord Tilter High Profile
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP72H-White Right Side End Cap
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NP36A Clear Plastic Plug
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x YNP01EF-Metal Cord Guide
1 x YNP01D-Right Del Mar Green Lock
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x ANP10A - White Right Side Body Cover
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NP16B Tape Only (160 feet)
1 x Part NP07A Wear Bar
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP62 cord guide
1 x Part NP36C Off White Plastic Plug
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031C-1" Wand Tilter A
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part SVS6 White End Cap(1 pair)
$1,218.33
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts