$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP16B Tape Only (160 feet)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP07A Wear Bar
1 x Part NP72B-Right Side Blue Cord Clutch
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part 07- Installation Bracket (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NV023- Vertical End Cap
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x # Threading Tool
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV002D - Wand Control
1 x Part NM031C-1" Wand Tilter A
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part 33A Vertical Track Bracket
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV034 Luminette End Control Stem and Gear
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
$770.16
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts