$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM031C-1" Wand Tilter A
2 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM013D Wand Tilter
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM038D - 1" Wand Tilter
2 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013C- 2" Wand Tilter
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM012A Cord Tilter High Profile
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP39A stopper
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM008 - Wand Tilter
1 x Part NP72B-Right Side Blue Cord Clutch
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP05A Cord Wedge
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP72G-White Left Side End Cap
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM013D- Compatible Tilter Ships Out
$685.61
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts