$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
2 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part- NM052 Levolor Mini Blind Cord Lock
2 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM013C- 2" Wand Tilter
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NR09 Cord Guide (screws not included)
2 x Part NM035- 1 Inch Wand Tilter Left Side
2 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM015- White Wand Tilter For One Inch blind
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM038C - 1' Wand Tilter
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP75 White Motor (no returns)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part NP36B White Plastic Plug
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP62 cord guide
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM031C-1" Wand Tilter A
1 x Part NP07A Wear Bar
1 x Part NP76 Grey Motor (no returns)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP71 Off White Left Cord Clutch Cover
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
$659.58
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts