$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part 32A Vertical Track Bracket
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM024- Mini Blind Cord Lock
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x # Threading Tool
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x ANP11B - White Left Side Lock Body
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x YNP01G-(1)Cord Guide
1 x Part NP72D-Off White Right Side End Cap
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP75 White Motor (no returns)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
$509.13
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts