$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV014- Silver Vertical Repair Clip
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NV030- Valance Corner
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NV009A- Vertical End Control
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM008 - Wand Tilter
1 x Part NP36C Off White Plastic Plug
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NP07A Wear Bar
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72G-White Left Side End Cap
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM013D Wand Tilter
1 x YNP01EF-Metal Cord Guide
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP36A Clear Plastic Plug
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x # Threading Tool
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x #1.4 mm cord size (click here for more information)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV002D - Wand Control
1 x Part NP37A- Motor Lock
1 x YNP01G-(1)Cord Guide
1 x Part NM012A Cord Tilter High Profile
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NV021a- Vertical Stopper
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP05A Cord Wedge
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
$717.92
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts