$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
2 x Part NM011A-Hook And Sleeve (Quantity 5)
2 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NV009A- Vertical End Control
2 x Part NM043A-Loop Type Wand Tilter
1 x Part NV023C-(Qty 2)Vertical Clip And Base
2 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
2 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM013D Wand Tilter
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM005A Cord Tilter Fits Hex Rod
2 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM040J- Valance Clip (Quantity 15)
2 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
2 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM038D - 1" Wand Tilter
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM008 - Wand Tilter
2 x Part NM013C- 2" Wand Tilter
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
2 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
2 x Part NM031C-1" Wand Tilter A
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
2 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
2 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM015- White Wand Tilter For One Inch blind
2 x Part NM005B Cord Tilter Fits Hex Rod
2 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM042- White Wand Tilter 2" With Hook
2 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
2 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
2 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
2 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM024- Mini Blind Cord Lock
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV021a- Vertical Stopper
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
$1,109.79
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts