$14.99

Part NP66 Right Side Black Motor (no returns or refunds)
[blinds parts]

Part NP66 Right Side Black Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NR09 Cord Guide (screws not included)
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV001-100 Clips(no returns)
1 x Part SVS6 White End Cap(1 pair)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
2 x Part NP05A Cord Wedge
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM008 - Wand Tilter
1 x Part NM013C- 2" Wand Tilter
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP37A- Motor Lock
2 x YNP01G-(1)Cord Guide
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP39A stopper
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP10A- Cord Guide 1 3/4" Wide
$785.44
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts