$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NP16B Tape Only (160 feet)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NP07A Wear Bar
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NM024- Mini Blind Cord Lock
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM031C-1" Wand Tilter A
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NP72F-Vanilla Left Side End Cap
1 x YNP01D-Right Del Mar Green Lock
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM012A Cord Tilter High Profile
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72G-White Left Side End Cap
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV021a- Vertical Stopper
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM008 - Wand Tilter
1 x YNP01G-(1)Cord Guide
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NV023- Vertical End Cap
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
$773.63
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts