$9.99

Part NP39- Tan Motor For Cordless Blind(no returns)
[blinds parts]

Part NP39-  Tan Motor For Cordless Blind(no returns)
You should replace the trans and all motors. I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repair one shade. No returns or refunds on all cordless shade parts. It's best to replace all the motors and the trans. To replace motor or trans, pull shade down. Lock up motor, so not to release the tension. Remove trans with motor. Replace damaged parts and reinstall. Remove any locking pins or motor locks.
Reviews
 
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP36C Off White Plastic Plug
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NP76 Grey Motor (no returns)
1 x Part NP36B White Plastic Plug
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP39A stopper
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP36A Clear Plastic Plug
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP07A Wear Bar
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP72H-White Right Side End Cap
1 x Part NM038C - 1' Wand Tilter
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x YNP01A Right Side Cord lock (White Only)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM031D- 1" Wand Tiler With Clutch
$634.70
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts