$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM013D Wand Tilter
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM013C- 2" Wand Tilter
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM043A-Loop Type Wand Tilter
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003B 2" Wand Tilter Zinc Loop
2 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
2 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012A Cord Tilter High Profile
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP07A Wear Bar
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part 33A Vertical Track Bracket
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM003AA- Cord Lock for 2" Blind
$740.17
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts