$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV009A- Vertical End Control
1 x Part NV001-100 Clips(no returns)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV002C End Control With Chain
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
2 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part 07- Installation Bracket (screws not included)
1 x Part NM012C- Discontinued New Version Will Ship Out
2 x Part 33A Vertical Track Bracket
2 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
2 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x # Threading Tool
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part 30A Brown Bracket LP (screws not included)
2 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
2 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
3 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
2 x Part 08- Silhouette Installation Bracket (screws not included)
2 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
2 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part 36 Pleated Shade Bracket (1)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
2 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
2 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
2 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
2 x #1.8 mm cord size (click here for more information)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
2 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
2 x Part NM038C - 1' Wand Tilter
2 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
2 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
2 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part 32A Vertical Track Bracket
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
2 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x #1.2 mm cord size (click here for more information)
2 x White Cord Loop B(6 Feet Tall) Click Here For More Information
2 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
2 x Part 25 Small Installation Backet (screws not included)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
$867.32
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts