$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
2 x Part NM006B- Wand Tilter For Levolor Blind
2 x Part- NM009H1 -Wand Tip (Quantity 12)
3 x Part NM040H- Valance Clip (Quantity 15)
2 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038E - 1" Wand Tilter
2 x Part NM032A Replacement Hook 1" Tall (Quantity10)
3 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
2 x Part NM012- 2" Wand Tilter For Low Profile
3 x Part NM011C-(Qty. 20)Clear Plastic End Cap
3 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
2 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM013D- Compatible Tilter Ships Out
2 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
3 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
2 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
3 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
2 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
2 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
3 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
3 x Part NM003BB1-Hunter Douglas Compatible Ships Out
3 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM003 -Wand Tilter For 2 Inch Blind
2 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
2 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
2 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
3 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP71A-Left Side Blue Cord Clutch
2 x Part NM011- Wand Tilter For 1" Blind
2 x Part NM043A-Loop Type Wand Tilter
1 x Part NM036- Right Side 1 Inch Tilter
3 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
2 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
2 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
2 x Part NM024- Mini Blind Cord Lock
2 x Part NM041G Valance Clip 2" Tall (Quantity 15)
2 x Part NM017 Cord Tilter Fits Square Rod
2 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM038D - 1" Wand Tilter
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.2 mm cord size (click here for more information)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005D Cord Tilter For 2" Blind
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x #1.4 mm cord size (click here for more information)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
$1,107.00
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts