$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
2 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
2 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
2 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV014- Silver Vertical Repair Clip
2 x Part NV014A- White Vertical Repair Clip
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV030- Valance Corner
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV003- Small Vertical Track End Control
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV021- Lock Washer
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV031B-Metal Link For 3dayblind Carrier
2 x Part NV001-100 Clips(no returns)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV012B1- Plastic Link
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV021a- Vertical Stopper
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM012A Cord Tilter High Profile
2 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
2 x Part NM035- 1 Inch Wand Tilter Left Side
2 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM036- Right Side 1 Inch Tilter
2 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM031C-1" Wand Tilter A
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D Wand Tilter
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x #2.7 mm cord size (click here for more information)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM024- Mini Blind Cord Lock
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
$883.36
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts